You are viewing a free preview of this lesson.
Subscribe to unlock all 10 lessons in this course and every other course on LearningBro.
Builds on: aqa-alevel-maths-pure-1 / differentiation — this lesson is the A2-level deep dive.
This lesson covers finding the equations of tangents and normals to curves — a fundamental application of differentiation in A-Level Mathematics. These ideas connect algebra, coordinate geometry, and calculus, and appear frequently on AQA papers.
Spec Mapping — AQA 7357 Section G Differentiation. This lesson covers the tangents-and-normals content of Section G, at the depth required for A2-level synoptic questions and modelling-style problems. Refer to the official AQA specification document for exact wording.
A tangent to a curve at a point P is the straight line that touches the curve at P and has the same gradient as the curve at that point.
To find the equation of a tangent to y = f(x) at x = a:
Find the equation of the tangent to y = x³ − 2x + 1 at the point where x = 2.
Step 1: y = 8 − 4 + 1 = 5. So the point is (2, 5).
Step 2: dy/dx = 3x² − 2. At x = 2: m = 3(4) − 2 = 10.
Step 3:
y−5=10(x−2)y−5=10x−20y=10x−15The equation of the tangent is y = 10x − 15.
A normal to a curve at a point P is the straight line that passes through P and is perpendicular to the tangent at P.
If the tangent has gradient m, the normal has gradient −1/m (provided m ≠ 0).
Two lines are perpendicular if and only if the product of their gradients is −1:
m1×m2=−1
Find the equation of the normal to y = x³ − 2x + 1 at (2, 5).
From Example 1, the tangent gradient is m = 10.
The normal gradient is −1/10.
y − 5 = −(1/10)(x − 2)
10(y − 5) = −(x − 2)
10y − 50 = −x + 2
x + 10y = 52
The equation of the normal is x + 10y = 52 (or equivalently y = −x/10 + 26/5).
Find where the curve y = x³ − 3x has horizontal tangents.
dy/dx=3x2−3=0x2=1x=±1At x = 1: y = 1 − 3 = −2. Tangent: y = −2. At x = −1: y = −1 + 3 = 2. Tangent: y = 2.
A tangent at one point on a curve may intersect the curve at another point. To find this intersection, substitute the tangent equation into the curve equation and solve.
The tangent to y = x³ at the point (1, 1) has equation y = 3x − 2 (verify: dy/dx = 3x², at x = 1 gives m = 3; y − 1 = 3(x − 1), so y = 3x − 2).
Find where this tangent meets y = x³ again.
Substitute y = 3x − 2 into y = x³:
x³ = 3x − 2
x³ − 3x + 2 = 0
We know x = 1 is a root (the point of tangency is a repeated root):
x³ − 3x + 2 = (x − 1)²(x + 2) = 0
So x = −2 is the other intersection. At x = −2: y = (−2)³ = −8.
The tangent meets the curve again at (−2, −8).
Exam Tip: At the point of tangency, x = a is always a repeated root of f(x) − (tangent line) = 0. Factor out (x − a)² to find the remaining intersection.
Find the equation of the tangent to y = eˣ at the point (0, 1).
dy/dx = eˣ. At x = 0: m = e⁰ = 1.
y − 1 = 1(x − 0)
y = x + 1
Find the equation of the normal to y = ln x at the point (e, 1).
dy/dx = 1/x. At x = e: m = 1/e.
Normal gradient = −e.
y − 1 = −e(x − e)
y = −ex + e² + 1
Find the point where the tangent and normal to y = x² at x = 1 intersect.
At x = 1: y = 1, dy/dx = 2x = 2.
Tangent: y − 1 = 2(x − 1) → y = 2x − 1
Normal: y − 1 = −(1/2)(x − 1) → y = −x/2 + 3/2
Set equal:
2x − 1 = −x/2 + 3/2
4x − 2 = −x + 3
5x = 5
x = 1
They intersect at the original point (1, 1) — which makes sense, since the tangent and normal to a curve at a point both pass through that point.
Find where the tangent to y = x² at x = 2 intersects the normal to y = x² at x = −1.
Tangent at x = 2: Point (2, 4), gradient 4. Equation: y − 4 = 4(x − 2) → y = 4x − 4.
Normal at x = −1: Point (−1, 1), tangent gradient = −2, normal gradient = 1/2. Equation: y − 1 = (1/2)(x + 1) → y = x/2 + 3/2.
Set equal:
4x − 4 = x/2 + 3/2
8x − 8 = x + 3
7x = 11
x = 11/7
y = 4(11/7) − 4 = 44/7 − 28/7 = 16/7
Intersection point: (11/7, 16/7).
If a curve is defined parametrically by x = f(t), y = g(t), then:
dy/dx=(dy/dt)div(dx/dt)A curve is given by x = t², y = 2t. Find the tangent at t = 3.
dx/dt=2t,dy/dt=2dy/dx=2/(2t)=1/tAt t = 3: point is (9, 6), gradient = 1/3.
Tangent: y − 6 = (1/3)(x − 9) → y = x/3 + 3.
This topic connects to:
aqa-alevel-maths-pure-1 / differentiation) — the AS-level toolkit for evaluating gradients at a point.aqa-alevel-maths-coordinate-geometry-depth / equations-of-lines) — point-gradient form, perpendicular gradient product, and intersection algebra.aqa-alevel-maths-pure-2 / differentiation-techniques) — required when the curve is not given as $y = f(x)$.Exam Tip: Always show clearly: (i) the coordinates of the point, (ii) the gradient calculation, (iii) the equation in a standard form. This earns full method marks even if you make a small arithmetic error. If asked for the equation in a particular form (e.g. ax + by + c = 0), make sure you rearrange accordingly.
AQA 7357 specification, Paper 1 — Pure Mathematics, Section G: Differentiation. The relevant content statement covers "use of differentiation to find equations of tangents and normals to curves". This sits inside the broader Section G strand on first principles, the power rule, products, quotients, chain rule, and applications to stationary points and rates of change. Tangents and normals are also examined synoptically in Section H (Integration, where the area between a curve and its tangent appears in mensuration applications), Section D (Coordinate geometry, where the relationship "tangent to a circle is perpendicular to the radius at the point of contact" recurs), and Section J (Numerical methods, where Newton-Raphson uses the tangent at xn to predict xn+1). The AQA formula booklet provides differentiation rules but does not state the point-gradient form of a straight line — candidates must memorise y−y1=m(x−x1).
Note: this question is constructed to model AQA Paper 1/2/3 style; it is not a reproduction of any published past paper.
Question (8 marks):
The curve C has equation y=x3−4x2+5x−2.
(a) Find the equation of the tangent to C at the point P(3,4), giving your answer in the form y=mx+c. (4)
(b) The normal to C at P meets the x-axis at Q. Find the exact coordinates of Q. (4)
Solution with mark scheme:
(a) Step 1 — differentiate.
dxdy=3x2−8x+5
M1 — correct application of the power rule term-by-term. The most common slip is leaving the −2 constant intact in the derivative; the derivative of a constant is zero.
Step 2 — evaluate the gradient at x=3.
mT=3(3)2−8(3)+5=27−24+5=8
A1 — correct gradient mT=8 obtained by substituting the x-coordinate of P into dxdy.
Step 3 — apply point-gradient form.
y−4=8(x−3)
M1 — substituting both the gradient and the coordinates of P correctly into y−y1=m(x−x1).
Step 4 — rearrange to the requested form.
y=8x−24+4=8x−20
A1 — final answer y=8x−20 in the requested form y=mx+c.
(b) Step 1 — find the normal gradient.
The normal is perpendicular to the tangent, so its gradient is the negative reciprocal:
mN=−mT1=−81
M1 — correct use of the perpendicularity condition mT⋅mN=−1.
Step 2 — equation of the normal through P(3,4).
y−4=−81(x−3)
M1 — substituting the new gradient and the same point P into point-gradient form. A frequent error is to use the foot of the normal rather than the point of contact; the normal is anchored at P.
Step 3 — set y=0 to find where the normal meets the x-axis.
−4=−81(x−3)⟹32=x−3⟹x=35
M1 — correct manipulation to isolate x.
A1 — exact coordinates Q(35,0).
Total: 8 marks (M4 A4, split as shown).
Question (6 marks): The curve C has equation y=x4+x2 for x>0.
(a) Find dxdy. (2)
(b) The point A on C has x-coordinate 2. Find the equation of the normal to C at A, giving your answer in the form ax+by+c=0 where a, b, c are integers. (4)
Mark scheme decomposition by AO:
(a)
(b)
Total: 6 marks split AO1 = 5, AO2 = 1. AQA tangent/normal questions are AO1-dominated; the AO2 mark is reserved for the presentation step that converts the answer into the requested integer form.
Connects to:
Section D — Coordinate geometry (circles): the tangent to a circle at any point is perpendicular to the radius at that point. The same negative-reciprocal-gradient principle that produces the equation of a normal to a curve produces the equation of a tangent to a circle. Confidence with one transfers directly to the other.
Section G — Implicit and parametric differentiation: for curves like x2+y2=25 or x=t2, y=t3, the gradient at a point still equals dxdy, but obtained via implicit differentiation (2x+2ydxdy=0) or the chain rule (dxdy=dx/dtdy/dt). Once the gradient is in hand, tangent and normal construction is identical.
Section H — Integration (area under a tangent): mensuration questions sometimes ask for the area enclosed between a curve, its tangent at a specified point, and the x- or y-axis. This requires the tangent equation first, then a definite integral.
Section O — Mechanics (kinematics): the velocity vector of a particle moving on a curve is tangent to the path; speed is the magnitude of the rate-of-change vector along the curve. The geometric meaning of "derivative as gradient of tangent" is the same as "velocity as instantaneous direction of motion".
Section J — Numerical methods (Newton-Raphson): the iteration xn+1=xn−f′(xn)f(xn) is exactly the x-intercept of the tangent to y=f(x) at x=xn. Every Newton-Raphson question is, in disguise, a tangent question repeated.
Tangent/normal questions on AQA 7357 split AO marks heavily toward AO1:
| AO | Typical share | Earned by |
|---|---|---|
| AO1 (knowledge / procedure) | 70–80% | Differentiating correctly, evaluating the gradient at a specified x, applying point-gradient form, using the negative-reciprocal rule for normals |
| AO2 (reasoning / interpretation) | 15–25% | Justifying the perpendicularity condition, expressing the answer in the requested form, recognising when a tangent passes through a stated external point |
| AO3 (problem-solving) | 0–10% | Open contexts (tangent from an external point, intersection of two normals) appear in Year 2 or in synoptic problems |
Subscribe to continue reading
Get full access to this lesson and all 10 lessons in this course.