You are viewing a free preview of this lesson.
Subscribe to unlock all 9 lessons in this course and every other course on LearningBro.
Almost everything made from oil — the petrol in cars, the diesel in lorries, the plastics in this device — begins as crude oil, a thick, dark liquid pumped from deep underground. Crude oil is a finite resource and a mixture of many different compounds, most of which are hydrocarbons — molecules made of hydrogen and carbon only. The most important hydrocarbons are the alkanes. This lesson, part of Topic C6 of OCR Gateway Science A, explains what crude oil is and how it formed, defines a hydrocarbon and an alkane, shows the first members of the alkane family, describes how their properties change with chain length, and covers complete combustion.
By the end of this lesson you should be able to describe crude oil as a finite mixture of hydrocarbons, define a hydrocarbon and an alkane, give the general formula and the first four alkanes, predict how the properties of alkanes change with chain length, and write balanced equations for complete combustion.
Crude oil is a finite resource formed over millions of years from the remains of ancient biomass — mainly tiny sea creatures and plants such as plankton that died and were buried under layers of sediment. Over a very long time, high pressure and temperature and the absence of oxygen turned this buried biomass into crude oil (and natural gas). Because it forms so slowly, crude oil is being used up far faster than it is replaced, so it is a finite (non-renewable) resource.
Crude oil is a mixture of many different compounds, the great majority of which are hydrocarbons. It is the raw material — the feedstock — for an enormous range of useful products: fuels such as petrol, diesel and kerosene, and the starting materials (petrochemicals) for plastics, solvents, detergents and much more.
Exam Tip: Two facts examiners want about crude oil: it is finite (formed over millions of years from ancient biomass/plankton) and it is a mixture of hydrocarbons. Calling it "a single compound" is a common and costly error.
A hydrocarbon is a compound made of hydrogen and carbon only — no other elements. Most of the hydrocarbons in crude oil are alkanes.
The alkanes are a family of hydrocarbons with these key features:
The first four alkanes are:
| Name | Formula | Number of carbons (n) | Check: 2n+2 |
|---|---|---|---|
| Methane | CH4 | 1 | 2(1)+2=4 ✓ |
| Ethane | C2H6 | 2 | 2(2)+2=6 ✓ |
| Propane | C3H8 | 3 | 2(3)+2=8 ✓ |
| Butane | C4H10 | 4 | 2(4)+2=10 ✓ |
The displayed formula shows every atom and every bond. Here are the first three alkanes drawn out:
Exam Tip: Learn the first four alkanes (meth-, eth-, prop-, but- = 1, 2, 3, 4 carbons) and the general formula CnH2n+2. Given any value of n, you can write the formula — and given a formula, you can check it is an alkane.
What is the formula of the alkane with 5 carbon atoms (pentane)?
Step 1 — use CnH2n+2 with n=5.
Step 2 — number of hydrogens =2n+2=2(5)+2=12.
Step 3 — write the formula: C5H12.
Answer: pentane is C5H12.
As the hydrocarbon chains get longer (more carbon atoms), the physical properties change in a predictable way. The reason is the intermolecular forces between molecules: longer molecules have more, stronger intermolecular forces, so more energy is needed to separate them.
| Property | Short chains (e.g. methane) | Long chains (e.g. bitumen) |
|---|---|---|
| Boiling point | Low | High |
| Viscosity (how thick/runny) | Runny (low viscosity) | Thick (high viscosity) |
| Volatility (how easily it evaporates) | High (evaporates easily) | Low |
| Flammability (how easily it burns) | High (burns easily) | Low |
So as the chains get longer: boiling point rises, the liquid becomes more viscous, it is less volatile, and it is less flammable. Short-chain hydrocarbons are gases or runny, volatile, flammable liquids (useful as fuels); long-chain hydrocarbons are thick, less flammable liquids or solids (useful as lubricants, fuel oil and bitumen).
Exam Tip: Connect the trend to intermolecular forces: longer chains have more/stronger intermolecular forces, so a higher boiling point. A classic trap is to say longer chains are more flammable — they are less flammable.
Two hydrocarbons are compared: hexane (C6H14) and an oil with chains of about 30 carbons. Which has the higher boiling point and which is more flammable?
Step 1 — compare the chain lengths: the oil has much longer chains (≈30 carbons) than hexane (6 carbons).
Step 2 — apply the trend: longer chains → higher boiling point and less flammable.
Step 3 — conclude: the oil has the higher boiling point; hexane (shorter chains) is more flammable.
Answer: the long-chain oil boils at a higher temperature; hexane is the more flammable of the two.
Subscribe to continue reading
Get full access to this lesson and all 9 lessons in this course.