You are viewing a free preview of this lesson.
Subscribe to unlock all 9 lessons in this course and every other course on LearningBro.
Flick a switch and electricity flows instantly — but behind that switch lies a chain of energy transfers that begins hundreds of miles away in a power station. Most of the electricity we use is generated by making a coil spin inside a magnetic field, and the real question is what provides the energy to keep that coil turning. In a fossil-fuel or nuclear station the answer is heat, used to boil water into steam that drives a turbine; in a wind or hydro station the moving air or water turns the turbine directly. This lesson traces the journey from an energy source to the electricity in the wires, compares the main methods of generation, and considers reliability and environmental impact.
By the end of this lesson you should be able to describe the sequence of energy transfers in a thermal power station, explain how fossil-fuel, nuclear and renewable methods generate electricity, distinguish between base-load and peak supply, and discuss the environmental considerations of each method.
Most large power stations — those burning coal, oil or gas, and nuclear stations — work in essentially the same way: they use a heat source to boil water, and the steam produced spins a turbine connected to a generator. The general sequence is:
energy source → boiler → turbine → generator → electricity
Following each stage:
The diagram below shows the sequence as a flow chart.
flowchart LR
A[Energy source: fuel burnt or nuclear reaction] --> B[Boiler heats water into steam]
B --> C[Steam spins the turbine]
C --> D[Turbine turns the generator]
D --> E[Electricity generated]
After the steam has passed through the turbine it is cooled back into water in a condenser (often using the cooling towers you see at power stations) and returned to the boiler to be used again.
It is helpful to follow the energy stores through this chain, because that is what many exam questions ask for. In a coal station, the coal begins with a store of chemical energy; burning it transfers that to a thermal energy store (hot gases and hot water/steam); the rushing steam carries a kinetic energy store as it spins the turbine; and finally the generator transfers this to an electrical energy store that flows out along the wires. At each stage some energy is inevitably wasted — mostly as heat lost to the surroundings through the cooling towers and in friction — which is why no power station is 100% efficient. A typical thermal power station converts only around a third to a half of the energy in its fuel into useful electrical energy, with the rest dissipated as thermal energy to the environment. Understanding this chain of stores, and where the wasted energy goes, is exactly the kind of reasoning the exam rewards.
Exam Tip: Learn the order source → boiler → turbine → generator. A frequent mistake is to say the turbine makes electricity — it does not; the turbine spins the generator, and it is the generator that produces the electricity.
Fossil-fuel stations burn coal, oil or gas in a furnace. The chemical energy stored in the fuel is released as thermal energy, which boils the water. Fossil-fuel stations are reliable — they generate whenever fuel is supplied — but burning the fuel releases carbon dioxide, and coal and oil also release sulfur dioxide. Gas stations have the advantage that they can be started up quickly to meet sudden demand.
Nuclear stations do not burn a fuel. Instead, the nucleus of a uranium atom is split in a process called nuclear fission, which releases a large amount of thermal energy. From the boiler onwards a nuclear station is just like a fossil-fuel one: the heat boils water, the steam spins the turbine, and the turbine drives the generator. Nuclear stations produce very little carbon dioxide and a small mass of fuel releases an enormous amount of energy, but they generate radioactive waste that must be stored safely, are very expensive to build, and take a long time to start up or shut down.
Exam Tip: Fossil-fuel and nuclear stations differ only in the energy source (burning fuel versus nuclear fission). From the boiler onwards — steam, turbine, generator — they are identical. State this clearly to show you understand the common design.
Many renewable methods skip the boiler and use a moving fluid to turn the turbine directly:
Other renewables provide heat rather than motion:
Exam Tip: Not every generation method uses steam and a turbine. Wind and hydro turn the turbine directly with air or water; solar cells produce electricity directly from light with no turbine or generator. Watch for questions that test this distinction.
Electricity demand is not constant — it rises in the morning and evening and falls overnight. The supply must match this changing demand.
Subscribe to continue reading
Get full access to this lesson and all 9 lessons in this course.