You are viewing a free preview of this lesson.
Subscribe to unlock all 9 lessons in this course and every other course on LearningBro.
Drop a stone into a still pond and ripples spread outwards in widening rings. A leaf floating on the surface bobs up and down as each ripple passes, but it does not travel across the pond with the wave — it ends up roughly where it began. This simple observation captures the single most important idea about waves: a wave transfers energy from one place to another without transferring matter. The ripple carries energy across the water, yet the water itself (and the leaf riding on it) stays put, merely oscillating in place. This lesson opens Topic P5 (Waves in matter) of OCR Gateway Science A by sorting waves into two great families — transverse and longitudinal — and defining the quantities used to describe every wave: amplitude, wavelength, frequency, period and wavefront.
By the end of this lesson you should be able to describe the difference between transverse and longitudinal waves, give examples of each, define amplitude, wavelength, frequency, period and wavefront, explain that waves transfer energy and not matter, and use the relationship T=f1 to connect period and frequency.
A wave is a disturbance that travels through a medium (or through space), transferring energy from one place to another. The crucial point — the one examiners test again and again — is that a wave moves energy along, not matter. The particles of the medium (the water, the air, the rope) oscillate about a fixed position as the wave passes, but they do not travel along with it.
Think again of the leaf on the pond, or a duck sitting on the sea: as waves roll past, the duck rises and falls but is not carried out to sea. The water particles move up and down (or, in deep water, in small circles) about their resting position; the wave pattern moves forward, but the water stays where it is. Energy has been transferred across the surface, but no water has been transported.
Exam Tip: If you remember only one fact about waves, make it this: waves transfer energy, not matter. The particles of the medium oscillate about a fixed point; they do not travel with the wave. This single sentence answers a huge number of P5 questions.
In a transverse wave, the oscillations (vibrations) are perpendicular (at right angles, 90°) to the direction in which the wave transfers energy. In other words, the bits of the medium move up and down (or side to side) while the wave travels along at right angles to that movement.
Picture shaking one end of a long rope up and down: a wave travels along the rope (left to right), but each part of the rope moves up and down, across the direction of travel. The high points of the wave are called crests (peaks) and the low points are called troughs.
Examples of transverse waves:
In a longitudinal wave, the oscillations are parallel to (along the same line as) the direction in which the wave transfers energy. The bits of the medium move backwards and forwards along the same direction the wave is travelling.
The classic model is a slinky spring pushed and pulled along its length. As you push the end in and out, regions where the coils are squashed together travel along the spring, separated by regions where the coils are stretched apart. The squashed-together regions are called compressions (the particles are close together, and the pressure is high); the stretched-apart regions are called rarefactions (the particles are spread out, and the pressure is low). A longitudinal wave is therefore a travelling pattern of compressions and rarefactions.
Examples of longitudinal waves:
Exam Tip: Get the two definitions word-perfect. Transverse: oscillations perpendicular to the direction of energy transfer. Longitudinal: oscillations parallel to the direction of energy transfer. Many students lose marks by writing a vague "up and down" — name the direction of energy transfer too.
The diagram below shows a transverse wave (top) with its crests and troughs, and a longitudinal wave (bottom) with its compressions and rarefactions. In both, the wave transfers energy to the right, but the oscillations differ in direction.
| Feature | Transverse wave | Longitudinal wave |
|---|---|---|
| Direction of oscillation | Perpendicular to energy transfer | Parallel to energy transfer |
| Wave shape | Crests and troughs | Compressions and rarefactions |
| Examples | Water, all EM waves, S-waves | Sound, P-waves |
| Can travel through a vacuum? | EM waves can; others need a medium | No — always needs a medium |
Exam Tip: A longitudinal wave cannot travel through a vacuum because it needs particles to compress and rarefy. Electromagnetic waves (which are transverse) can travel through a vacuum — that is how light and radio reach us from the Sun and from satellites.
Whatever type a wave is, we describe it using the same set of measurements. These apply most easily to a transverse wave, but they describe longitudinal waves too.
Amplitude (A) is the maximum displacement of a point on the wave from its rest (undisturbed) position. On a transverse wave it is the height of a crest (or the depth of a trough) measured from the centre line — not from a crest down to a trough. The amplitude tells you how much energy the wave carries: a bigger amplitude means more energy. It is measured in metres (m).
Wavelength (λ) is the distance of one complete wave cycle — for example, from one crest to the next crest, or from one compression to the next compression. The symbol is the Greek letter lambda, λ, and it is measured in metres (m).
Frequency (f) is the number of complete waves (cycles) passing a point each second. It is measured in hertz (Hz): a frequency of 1 Hz means one wave passes each second, and 50 Hz means fifty waves pass each second.
Period (T) is the time taken for one complete wave to pass a point, measured in seconds (s). It is simply the time for a single cycle.
Wavefront — a wavefront is a line (or surface) joining all the points on a wave that are in step with each other, such as a line along the top of a crest. The ripples spreading from a stone are circular wavefronts; far from the source, wavefronts look like straight parallel lines. Wavefronts are always drawn at right angles to the direction the wave is travelling, and neighbouring wavefronts are one wavelength apart.
The diagram below labels the amplitude and wavelength on a transverse wave.
Exam Tip: Amplitude is measured from the rest position to a crest — half the total crest-to-trough height. A common error is to read the full peak-to-trough distance and call it the amplitude; that is twice the amplitude.
Frequency and period describe the same thing from two angles. Frequency counts how many waves pass each second; period measures how long a single wave takes. They are reciprocals of one another:
T=f1andf=T1
where T is the period in seconds and f is the frequency in hertz. If many waves pass each second (high frequency), each one takes only a short time (small period); if few pass each second (low frequency), each takes longer.
A wave has a frequency of 50 Hz. Calculate its period.
Step 1 — write the equation: T=f1.
Step 2 — substitute: T=501.
Step 3 — calculate: T=0.02 s.
Answer: the period is 0.02 s — each wave takes one-fiftieth of a second to pass.
A pendulum-like wave source produces one wave every 0.25 s. Calculate the frequency.
Step 1 — write the equation: f=T1.
Step 2 — substitute: f=0.251.
Step 3 — calculate: f=4 Hz.
Answer: the frequency is 4 Hz — four complete waves pass each second.
Exam Tip: T=f1 is on the OCR equation sheet, but it pays to know it by heart. A quick check: frequency in Hz and period in s should multiply to give 1 (f×T=1). If they do not, you have made a slip.
It is worth returning to the central idea once more, because it underlies the whole topic. When a wave travels:
Evidence is all around. A cork bobs but stays put as ripples pass; sound carries a voice across a room without any air being blown from speaker to listener; sunlight delivers energy across 150 million kilometres of empty space, yet no matter crosses that gap. In every case, energy is transferred while the matter stays (on average) in place. This is exactly what distinguishes a wave from, say, a thrown ball or a flowing river, where matter itself moves from one place to another.
| Misconception | The correct idea |
|---|---|
| "A wave carries the water (or air) along with it" | A wave transfers energy, not matter; the particles oscillate about a fixed point and stay put |
| "Amplitude is the distance from a crest to a trough" | Amplitude is measured from the rest position to a crest — half the crest-to-trough height |
| "Transverse means the wave goes up and down" | Transverse means the oscillations are perpendicular to the direction of energy transfer — name the energy-transfer direction |
| "Sound is a transverse wave" | Sound is longitudinal — it travels as compressions and rarefactions |
| "Longitudinal waves can travel through a vacuum" | They cannot — they need particles to compress; only EM (transverse) waves cross a vacuum |
| "Higher frequency means a longer period" | Higher frequency means a shorter period: T=f1 |
Question (6 marks): A student says "all waves are the same — they just move stuff from one place to another." Using transverse and longitudinal waves as examples, explain what is wrong with this statement and how the two types of wave differ.
Mid-band response: "The student is wrong because waves carry energy, not stuff. A transverse wave moves up and down, like water. A longitudinal wave is like sound, with squashed bits."
Examiner-style commentary: The key idea (energy not matter) is present, and the two examples are right, but the descriptions are vague. To climb a band, define each wave type by the direction of oscillation relative to energy transfer, and name crests/troughs and compressions/rarefactions.
Stronger response: "The student is wrong: a wave transfers energy from place to place, but the particles of the medium just oscillate about a fixed point and do not travel with the wave. In a transverse wave, like water or light, the oscillations are perpendicular to the direction the wave travels, giving crests and troughs. In a longitudinal wave, like sound, the oscillations are parallel to the direction of travel, giving compressions and rarefactions."
Examiner-style commentary: A clear, correct answer with the right definitions and examples. To reach the top band, state explicitly that the particles return to their starting positions, and add that longitudinal waves need a medium whereas electromagnetic transverse waves can cross a vacuum.
Top-band response: "The statement is wrong because a wave does not move matter from place to place — it transfers energy. As a wave passes, the particles of the medium oscillate about a fixed position and return to where they started; only the energy (and the wave pattern) travels onward. The two families differ in the direction of oscillation relative to the direction of energy transfer. In a transverse wave — such as a water wave, any electromagnetic wave, or an S-wave — the oscillations are perpendicular to the direction of energy transfer, producing crests and troughs. In a longitudinal wave — such as a sound wave or a P-wave — the oscillations are parallel to the direction of energy transfer, producing compressions (particles squashed together) and rarefactions (particles spread apart). A further difference is that a longitudinal wave always needs a medium of particles, whereas electromagnetic transverse waves can travel through a vacuum."
Examiner-style commentary: Full marks. It corrects the misconception with the energy-not-matter principle, gives the precise definition of each wave type relative to the energy-transfer direction, names the correct features and examples, and adds the vacuum distinction — a complete comparison.
This content is aligned with OCR Gateway Science A GCSE Physics (J249), Topic P5 Waves in matter (transverse and longitudinal waves; amplitude, wavelength, frequency, period and wavefront; waves transfer energy not matter). Refer to the official OCR specification document for the exact wording.